Household appliances have become widespread. In the modern world there are no people left in whose home there is no washing machine, refrigerator, electric kettle and other appliances that work from an outlet.
Quite often there are cases when an automatic washing machine shocks. If you read more information on mannyappliances.com, you can find out why this happens:
- violation of rules when installing a washing machine mannyappliances. Probably, grounding was not done during installation;
- faulty socket or electrical wiring. In such situations, the unreliability of the protective wire can be traced, which leads to discharge, as a rule, through the body of the person who touches it;
- current leakage is possible if the insulation on the wires located inside the washing machine is damaged;
- operation of the unit in specific conditions, such as high humidity, duration of time, which leads to wear of the insulation, etc.;
- the protective shutdown device does not operate when current leakage of various types occurs.
Experts are of the opinion that a washing machine receives an electric shock in the presence of two factors: a violation of the insulation of the electrical wire and a malfunction of the residual current device.
How to eliminate the reasons why your washing machine is electrocuted
If a malfunction occurs with the electrical component of the unit, you must turn off the electricity in the apartment, turn off the power, and only then order repairs on the https://mannyappliances.com/washing-machine-repair/frigidaire-washer-repair/ or begin troubleshooting yourself. If the machine produces an electric shock when it is turned off:
- check the serviceability of the socket. It is necessary to disassemble it and identify the fault, followed by replacing the components or the outlet itself;
- violation of the insulation of the wire or power cord. Identify the place where a gap has formed or loss of insulation has formed and bring everything into compliance;
- the network filter may be faulty. To identify the problem, it is necessary to disassemble it and replace unsuitable components. If it cannot be repaired, buy a new surge protector;
- current leakage is possible if the washing machine is located in a place where the air humidity is higher than normal, which leads to the collection of condensate, which conducts electricity. In this case, the unit must be moved to another place with a normal level of humidity.
It should be remembered that if you do not have the knowledge and skills to repair electrical components, entrust the work to a specialist to avoid electric shock.
